Sovereignty Ash Catcher Problem *refer to pictures*

Discussion in 'Scientific Glass' started by rlsowns, Oct 9, 2018.

  1. rlsowns

    rlsowns BM v2 Subscriber

    Rating - 100%
    8   0   0

    Joined:
    Oct 25, 2015
    Messages:
    105
    Likes Received:
    12
    Hi all,

    I have come across a problem with my Sovereignty Ash Catcher that has stumped me and I just cannot figure out how to fix it. I was using it one day with my Sovereignty Stem 8, along with a bowl inside of it. A very large book fell from my shelf right onto the top of the bowl while it was inside of the ash catcher, and ended up breaking the bowl off of the ash catcher. However, the piece that was part of the bowl broke off into my ash catcher and now I don't know how to get it out safely. I took a small risk and tried to chip away at it from the inside with a small chisel and hammer, where I would very lightly tap it as it chipped away bit by bit. It got to a point where it was taking forever and I no longer felt safe continuing to chisel away, as I feared for breaking the ash catcher. Does anyone have any advice for how I can solve this issue? Thanks!

    IMG_1958.jpg

    IMG_1959.jpg
     
  2. UOFreeshards

    Advertisement

    0   0   0

     
  3. Eazy glass

    Eazy glass

    0   0   0

    Joined:
    Sep 29, 2018
    Messages:
    2
    Likes Received:
    0
    You try putting it in the freezer? Or use a potato.... IDK that's a bummer.
     
  4. missynicole13

    missynicole13 BM v2 Subscriber

    Rating - 100%
    3   0   0

    Joined:
    Mar 24, 2013
    Messages:
    153
    Likes Received:
    19
    Wooden spoon?
     
  5. Eazy glass

    Eazy glass

    0   0   0

    Joined:
    Sep 29, 2018
    Messages:
    2
    Likes Received:
    0
    Small amount of expanding foam....
     
  6. Simmerdownjames

    Simmerdownjames BM v2 Subscriber

    0   0   0

    Joined:
    Feb 24, 2017
    Messages:
    34
    Likes Received:
    2
    Fluorinated grease
     

Share This Page